English
Français 
Italiano 
230V COB PRO LED Strip - 16W - 560LED/m - 1650Lm - IP65
Professional 230V COB LED Strip, 16W/m and 1650Lm/m. 560 Leds/m FLIP COB LED chip for continuous illumination without spotlights or shadows. Available in meter cuts or 50-meter rolls. TRIAC dimmable, no rectifier required.
The Professional 230V COB LED Strip is the ideal choice for lighting projects requiring exceptional performance and high-quality light. With its innovative design and advanced features, this LED strip provides uniform and flawless lighting, thanks to its 560 Leds/m FLIP COB LED chip. Its transparent silicone coating with IP65 protection rating ensures excellent resistance to water and dust, making it suitable for a wide range of indoor and outdoor applications.
- Each cut includes start connector and end plug
- Power: 16W/m
- Luminous Flux: 1650Lm/m
- LED Chip: 560 Leds/m FLIP COB
- Coating: Transparent Silicone IP65
- Total Dimensions: 10x4mm (with silicone sleeve)
- PCB Width: 8mm
- Dimmable: Yes, TRIAC
All custom-cut materials are non-refundable and cannot be exchanged or returned except in cases of fault or defect.
COB LED Strip PRO 230V 16W/m 560 LED/m 1650 lm/m IP65 FLIP COB Dimmable 50 m Roll
The COB LED strip PRO 230V at 16W/m offers 1650 lm/m thanks to 560 FLIP COB LED/m, for continuous light with no dots or shadows. IP65 silicone sleeve (10x4 mm), 8 mm PCB, TRIAC dimmable without rectifier, sold by the metre or in 50 m rolls.
⚡ 16W/m💡 1650 lm/m☂ IP65🌓 Dimmable
| 16W/m Power | 1650 lm/m Luminous flux | 560 LED/m Density | IP65 Protection |
The professional COB LED strip 230V offers a power of 16W/m and a luminous flux of 1650 lm/metre, with a transparent IP65 silicone coating. Its FLIP COB LED chip of 560 LED/metre ensures continuous light, with no dots or shadows, unlike standard SMD strips.
Total dimensions with silicone sleeve 10x4 mm, 8 mm wide PCB. It is intensity-dimmable by TRIAC, with no rectifier required (direct 230V connection). Available by the metre or in 50-metre rolls, it is the ideal choice for projects demanding exceptional performance: cornices, ceilings, facades and commercial spaces. For better heat dissipation, install it on an aluminium profile.
Why choose this product?
Continuous light with no dots or shadows, 1650 lm/m.
Transparent silicone, direct connection without rectifier.
By the metre or 50 m roll, demanding projects.
Technical specifications
| Product type | Professional COB LED strip 230V |
|---|---|
| Voltage | 230V |
| Power | 16W/m |
| Density | 560 LED/m (FLIP COB) |
| Luminous flux | 1650 lm/m |
| Protection | IP65 (silicone) |
| Dimensions | 10x4 mm (PCB 8 mm) |
| Dimming | TRIAC (no rectifier) |
| Length | By the metre / 50 m roll |
Advantages
- 560 FLIP COB/m: no dots or shadows.
- 1650 lm/m: high brightness.
- IP65, 230V: direct connection.
- TRIAC dimmable: no rectifier.
- By the metre or 50 m: flexible.
- Silicone 10x4 mm: 8 mm PCB.
Recommended applications
| 🚪 | Cornices and ceilings — continuous linear lighting. |
| 🏠 | Facades — IP65, 230V. |
| 🏛 | Shops — pro performance. |
| 🌿 | Large projects — 50 m roll. |
Installation guide
| 1 | Switch off the power Cut the 230V supply before installation. |
| 2 | Cut the strip Cut the strip at the marked points. |
| 3 | Wire it Connect directly to 230V (TRIAC, no rectifier). |
| 4 | Check Restore power and check the lighting. |
Frequently asked questions
The 560 FLIP COB/m remove the dots and shadows of SMD.
No, direct 230V connection, TRIAC dimmable.
Yes, its IP65 rating resists rain and dust.
| ⚡ 16W/m 1650 lm/m | ☂ IP65 230V | 💡 560 LED/m 50 m | 🔌 In stock Fast shipping |
Data sheet
- Power (W)
- 16W
- Power source (V)
- 220-240V
- Color temperature CCT
- 2200K
2700K
4000K
5700K
- LED
- COB Flip chip
- Dimmable
- Sí, TRIAC
- Brightness (Lm)
- 1650
- Color rendering index (Ra):
- ≥90
- IP
- IP67
- Luminous angle
- 180º
- Frequency (Hz)
- 50-60Hz
- Measures (mm)
- 10x4mm
- Operating temperature
- -20ºC ~ +55ºC
- Energy efficiency 2021
- A+
- Energy efficiency 2023
- F
- Lifespan
- 35.000h
- Certification
- CE - RoHS
- Warranty
- 3 años
 Antonio garcia on 2024-04-15 22:37:09 | Question: Tengo una guía de 2 mts de longitud de 7mm máximo de ancho. El los extremos entran los cables de línea y neutro. Lo podría adaptar a mis necesidades? |
Answer: La tira tiene un ancho de 10mm contando con la funda de silicona necesaria para proteger las tiras a 230V, por lo que la guía que tienes no es apta para esta tira. Te recomendamos revisar nuestra sección de perfiles de aluminio: https://www.premiumled.es/es/perfiles-de-aluminio | |
| ENRIQUE on 2024-04-12 08:08:08 | Question: Hay posibilidad de poner un control remoto para aumentar/reducir intensidad?? Gracias |
Answer: Puedes instalar la pastilla reguladora TRIAC/WIFI y sincronizarla con la app TUYA en el móvil, y de esta forma controlar remotamente el encendido y la intensidad desde la aplicación: https://www.premiumled.es/es/reguladores-de-potencia/regulador-led-inteligente-smart-wifi-app-tuya-sistema-pastilla-triac | |
| Jorge Manuel on 2024-01-05 13:02:56 | Question: estas tiras de led necesitan rectificador? |
Answer: No, la tira ya va rectificada y la conexión se realiza directa a 230V. | |
