L 90° Corner Connector for Single-Phase Rail
Square L-type corner connector for single-phase rail union, made of flame-retardant thermoplastic with a copper connection, available in white or black, with dimensions of 43×78×20mm.
The L-shaped connector at 90° is used to create corners and right angles with a fixed angle.
Assembly is carried out by snapping onto the end of the rail, then adjusting the next section.
L 90° Corner Connector for Single-Phase Rail
Connector for 90° L-angle connection in continuous single-phase LED spotlight rails. Made of flame-retardant thermoplastic, available in black or white to match the rail, with a single-circuit copper connection.
Suitable for single-phase rails only. Used to create 90° corners and right-angle layouts. Dimensions: 43×78×20mm.
Technical Data :
- Type: L-corner, 90° fixed angle
- Compatibility: single-phase rail (1 circuit)
- Material: flame-retardant thermoplastic
- Connection: copper, single circuit
- Dimensions: 43×78×20mm
- Finish: black or white
Installation and Mounting Recommendations :
Ensure the rail is de-energised before fitting any connector. Snap the connector onto the end of each rail section at the required 90° angle. Tighten any securing screws. Use only with compatible single-phase rail systems.
Recommended Uses and Applications :
- Creating 90° corner turns in single-phase rail layouts.
- Perimeter and rectangular track lighting installations in retail and commercial spaces.
Data sheet
- Colour
- Black
White
- IP
- IP20
- Measures (mm)
- 43*78mm
- Material
- Thermoplastic
- Certification
- CE - RoHS
- Warranty
- 2 años
Specific References
- ean13
- 8435637201469