English
Français 
Italiano 
T8 LED Tube 22W 150cm with radar sensor + Permanent 20% Lighting
The 22W LED T8 Tube is an ideal solution for efficiently lighting spaces, equipped with a RADAR sensor that automatically adjusts brightness based on motion detection. With a length of 150cm, a luminous flux of 2144 lumens, it supports single or double-end wiring and provides 20% permanent lighting and increases to 100% when motion is detected.
Made of aluminum and PC, the LED tube has a 180º lighting angle that ensures uniform light distribution. The RADAR sensor has a detection radius of 8 meters, and after 30 seconds without motion detection, it reduces brightness to 20%, consuming only 3W, optimizing energy savings.
- Power: 22W
- Luminous Flux: 2144 lm
- Standby Consumption: 3W (at 20% brightness)
- Length: 150cm
- Dimensions: Ø32x1500mm
- Connection: Single or double-end wiring
- Lighting Angle: 180º
- Material: Aluminum + PC
- RADAR Sensor: Detection radius of 8 meters
- Response Time: 30 seconds without motion to reduce to 20%
T8 LED Tube 22W 150 cm with RADAR Sensor and Permanent 20% Standby
The 22W 150 cm T8 LED tube has a built-in RADAR motion sensor with permanent 20% standby: it stays at 20% on standby and rises to 100% when presence is detected, for greater energy savings. 180º angle, ideal for car parks, garages and corridors.
⚡ 22W📐 150 cm📡 RADAR🔌 T8
| 22W Power | 150 cm Length | RADAR Sensor | 20-100% Standby/active |
The 22W 150 cm T8 LED tube is an efficient lighting solution with a built-in RADAR motion sensor for greater energy savings. Thanks to its permanent 20% standby mode, the tube stays slightly on in standby and automatically rises to 100% when presence is detected, then drops back to 20% after passing.
This intelligent management considerably reduces consumption while ensuring an always-lit area for safety. With a 180º angle, it replaces classic T8 fluorescent tubes, ideal for car parks, garages, corridors, stairs, warehouses and traffic areas.
Why choose this product?
Rises to 100% on detection, drops back to 20% after.
Always-lit area, energy savings.
Replaces classic T8 fluorescent tubes.
Technical specifications
| Product type | T8 LED tube with RADAR sensor |
|---|---|
| Power | 22W |
| Length | 150 cm |
| Sensor | RADAR (motion) |
| Mode | Permanent 20% standby / 100% on detection |
| Angle | 180º |
| Use | Car parks, garages, corridors |
Advantages
- RADAR sensor: 100% on detection.
- Permanent 20%: always-lit area.
- Energy saving: intelligent management.
- 22W, 150 cm: replaces T8 fluorescent.
- 180º angle: wide diffusion.
- Car parks and garages: traffic areas.
Recommended applications
| 🚪 | Car parks and garages — detection lighting. |
| 🏠 | Corridors and stairs — energy savings. |
| 🏛 | Warehouses and cellars — always-lit area. |
| 🌿 | Traffic areas — safety and comfort. |
Installation guide
| 1 | Switch off the power Cut the supply before replacement. |
| 2 | Install the T8 tube Fit the tube in the T8 holder (150 cm). |
| 3 | Check the RADAR mode The tube stays at 20% and rises to 100% when passing. |
| 4 | Test Restore power and check the detection. |
Frequently asked questions
It keeps the tube at 20% and raises it to 100% on motion detection.
150 cm, standard T8 format (22W).
It only runs at full power when there is presence.
| ⚡ 22W 150 cm | 📡 RADAR 20-100% | 🔌 T8 180º | 🔌 In stock Fast shipping |
Data sheet
- Power (W)
- 22
- Power source (V)
- 100-240V
- Color temperature CCT
- 4000K
6500K
- LED
- SMD2835
- Lampholder
- G13
- Brightness (Lm)
- 2144
- Color rendering index (Ra):
- ≥80
- Colour
- White
- IP
- IP20
- Luminous angle
- 180º
- Frequency (Hz)
- 50-60Hz
- Power factor φ
- 0.90
- Measures (mm)
- Ø32x1500mm
- Material
- Aluminum + PC
- Operating temperature
- -20ºC ~ +40ºC
- Energy efficiency 2021
- A+
- Energy efficiency 2023
- F
- Lifespan
- 30.000h
- Certification
- CE - RoHS
- Warranty
- 3 años
