English
Français 
Italiano 
90cm 13W T8 LED Tube 1690Lm High Efficiency
The T8 LED Tube of 90cm and 13W power is made of opal glass and ABS plastic, providing a luminous flux of 1690 lumens. This LED tube is built with high-performance SMD2835 chips, offering exceptional luminous efficiency of 150Lm/W and uniform lighting thanks to its wide 300º beam angle.
The T8 LED Tube is designed for direct connection to 230V via its G13 base. It offers instant start with no flickering, ensuring continuous and uninterrupted lighting, replacing conventional fluorescent tubes up to 30W, while reducing energy consumption by more than half.
With a luminous efficacy greater than 150Lm/W, this LED tube delivers intense lighting that outperforms other tubes on the market. Thanks to its wide 300º beam angle, the tube distributes light evenly, reducing the number of fixtures needed to fully illuminate a room.
- Power: 13W
- Luminous Flux: 1690 lumens
- Luminous Efficiency: 150Lm/W
- Beam Angle: 300º
- Connection: 1-end
- Material: Opal Glass and ABS Plastic
- Length: 90cm
T8 LED Tube 13W 90 cm Glass 300º 1690 lm High Brightness
A 90 cm T8 LED tube in opal glass that replaces fluorescent tubes with over 50% savings. 13W, 1690 lumens, 150 lm/W efficiency, a 300º angle and instant, flicker-free start.
⚡ 13W💡 1690 lm🔄 300º🔌 150 lm/W
| 13W Power | 1690 lm Luminous flux | 150 lm/W Efficiency | 300º Beam angle |
The 13W 90 cm T8 LED tube is an efficient lighting solution to replace traditional fluorescent tubes. With a luminous flux of 1690 lumens and an efficiency of 150 lm/W, it offers over 50% savings versus fluorescent tubes, with instant, flicker-free start.
Made from high-quality opal glass and ABS plastic, it ensures better light distribution thanks to its 300º angle. With a T8 base, single-end connection, a 175-265V voltage and a Ø26 mm diameter, it suits indoor use (IP20) and even outdoors if installed in a waterproof fitting.
Why choose this product?
Over 50% savings versus fluorescent tubes.
Opal glass for even light distribution.
Flicker-free, for immediate visual comfort.
Technical specifications
| Product type | Glass T8 LED tube |
|---|---|
| Power | 13W |
| Luminous flux | 1690 lm |
| Efficiency | 150 lm/W |
| Beam angle | 300º |
| Base | T8 |
| Connection | Single-end |
| Voltage | 175-265V |
| Material | Opal glass and ABS |
| Length | 90 cm |
| Diameter | Ø26 mm |
| Protection | IP20 |
Advantages
- 150 lm/W: over 50% savings versus fluorescent.
- 1690 lumens: high brightness.
- 300º angle: opal glass, even light.
- Instant start: flicker-free.
- Single-end connection: simple installation.
- Opal glass + ABS: quality and strength.
Recommended applications
| 🚪 | Offices — fluorescent tube replacement. |
| 🏠 | Shops — efficient lighting. |
| 🏛 | Workshops and garages — technical lighting. |
| 🌿 | Corridors and warehouses — even light. |
Installation guide
| 1 | Switch off the power Cut the supply before installation. |
| 2 | Remove the starter For a fluorescent fitting, remove/replace the starter as instructed. |
| 3 | Install the tube Fit the T8 tube (single-end connection) into the lampholders. |
| 4 | Switch on Restore power and check the instant start. |
Frequently asked questions
150 lm/W, i.e. over 50% savings versus fluorescent tubes.
Single-end, with a T8 base.
Indoors (IP20), and outdoors only in a waterproof fitting.
| 🔌 150 lm/W +50% saving | 💡 1690 lm 300º | ⚡ Instant Flicker-free | 📦 In stock Fast shipping |
Data sheet
- Power (W)
- 13
- Power source (V)
- 175-260V
- Color temperature CCT
- 3000K
4000K
6000K
- Lampholder
- G13
- Luminous efficacy (Lm/W)
- 130
- LED diode efficiency (Lm/W)
- 150
- Brightness (Lm)
- 1690
- Color rendering index (Ra):
- ≥80
- IP
- IP20
- Luminous angle
- 300º
- Frequency (Hz)
- 50-60Hz
- Power factor φ
- 0.95
- Measures (mm)
- 900mm
- Material
- Glass
- Operating temperature
- -20ºC ~ +55ºC
- Energy efficiency 2021
- A+
- Lifespan
- 25.000h
- Certification
- CE - RoHS
- Warranty
- 3 años
Specific References
- ean13
- 8435637202398
