English
Français 
Italiano 
Mini IR Motion Detector 120° 230V IP65
Small motion detector with a diameter of only 2 centimetres, making it completely unobtrusive. Adaptable to a ceiling, an LED panel, or any type of luminaire thanks to its compact size. The external part of the detector (infrared capsule) can be used in damp and outdoor areas as it is IP65.
Mini IR Motion Sensor 120º 230V IP65
A miniature motion sensor just 2 cm in diameter, ideal for discreet integration into any fixture. With detection up to 8 metres, a 120º angle and IP65 protection of the sensor, it automates lighting indoors and outdoors.
🔄 120º📏 8 m🔌 IP65📐 Ø 2 cm
| 120º Coverage | 8 m Detection | IP65 Sensor protection | Ø 2 cm Size |
This miniature infrared motion sensor, just 2 centimetres in diameter, is ideal for completely discreet integration into an LED plate, a 60x60 panel or any type of fixture. Thanks to its IP65 protection at the sensor, it is also suitable for outdoors (the control housing must remain protected).
It offers a detection range of up to 8 metres and a coverage angle of 120º. It uses infrared as its activation source, with a built-in dusk sensor: it activates when a heat source moves within its field and deactivates when movement stops. Its settings cover the on-time, the detection range and the light sensitivity, with a timer from 5 seconds to 7 minutes.
Why choose this product?
Just 2 cm in diameter for invisible integration.
Suitable for outdoors (control housing must be protected).
Adjustable on-time, detection range and light sensitivity.
Technical specifications
| Product type | Miniature infrared motion sensor |
|---|---|
| Coverage angle | 120º |
| Detection range | 8 m |
| Diameter | 2 cm |
| Timer | 5 s to 7 min |
| Settings | Time, detection range, light sensitivity |
| Dusk sensor | Yes |
| Voltage | 230V |
| Protection | IP65 (sensor) |
Advantages
- Miniature format: Ø2 cm for invisible integration.
- 8 m / 120º detection: wide coverage field.
- IP65 sensor: can be used outdoors.
- Dusk sensor: switching based on ambient light.
- Fully adjustable: time, range and sensitivity.
- Versatile: fits LED plates, panels and fixtures.
Recommended applications
| 🚪 | Corridors and stairways — discreet automatic switching. |
| 🏠 | LED plates and 60x60 panels — invisible integration. |
| 🏛 | Outdoor fixtures — IP65 sensor. |
| 🌿 | Passage areas — presence detection. |
Installation guide
| 1 | Switch off the power Cut the supply before installation. |
| 2 | Integrate the sensor Fit the sensor (Ø2 cm) into the fixture; protect the control housing. |
| 3 | Make the connection Wire to 230V as per electrical regulations. |
| 4 | Set the parameters Adjust the time, detection range and sensitivity, then test. |
Frequently asked questions
Yes, the sensor is IP65; the control housing must remain protected.
Up to 8 metres, with a 120º coverage angle.
In an LED plate, a 60x60 panel or any fixture thanks to its small size.
| 📐 Ø 2 cm Invisible integration | 🔌 IP65 Outdoor sensor | 🔄 120º / 8 m Detection | 📦 In stock Fast shipping |
Data sheet
- Power (W)
- 400
- Power source (V)
- 85-265V
- IP
- IP65
- Luminous angle
- 120°
- Frequency (Hz)
- 50-60Hz
- Measures (mm)
- L47*W25*H20mm
- Material
- Thermoplastic
- Operating temperature
- -20ºC ~ +55ºC
- Lifespan
- 30.000h
- Certification
- CE - RoHS
- Warranty
- 3 años
