Tira LED COB 24V 12W/m 280LED/m 1320Lm CRI90 IP20 - Rollo 5 metros
24VDC IP67 waterproof COB LED strip with a consumption of 12W/m, in 30-meter rolls cut every 50mm. The COB LED strip consists of 480 LED chips per meter, giving a continuous visual effect, unlike standard SMD LED strips.
Highly bright, the 24V COB LED strip offers a luminous flux of 1200 lumens per meter and is extremely flexible and moldable to adapt to any surface. Includes 3M adhesive on the back.
COB LED strip width: 8 mm
Silicone sheath width: 10 mm
Dimmable using dimmable power supplies or dimmer controllers for single-color LED strips.
High CRI >90: Highlights vivid colors and reproduces the color gamut faithfully.
We recommend installing the COB LED strip on an aluminum profileee for proper heat dissipation and to maximize its lifespan. 24V LED strips require a power supply and runs of up to 10 meters. If installing longer lengths, the LED strip must be powered from both ends.
COB LED Strip IP67 24V 12W/m 480 LED/m 1200 lm/m CRI90 Dimmable 30 m Roll
The COB LED strip IP67 24V at 12W/m, in a 30-metre roll, offers 480 LED/m for a continuous, dot-free light effect, and 1200 lm/m with a CRI 90. Waterproof, flexible, dimmable, cut every 50 mm, 3M adhesive included.
⚡ 12W/m💡 1200 lm/m☂ IP67🌈 CRI 90
| 12W/m Power | 1200 lm/m Luminous flux | 480 LED/m Density | IP67 Protection |
The COB LED strip IP67 24V, dimmable single-colour, in a 30-metre roll with a cut every 50 mm, consists of 480 LED chips per metre. This density gives a continuous, even visual effect, with no light dots, unlike standard SMD LED strips. High brightness: 1200 lumens per metre.
Extremely flexible and malleable, it adapts to any surface and includes a 3M adhesive on the back for easy fitting. Its IP67 rating makes it waterproof, and its CRI > 90 highlights vivid, faithful colours. Dimmable via suitable power supplies or controllers; strip width 8 mm (silicone sleeve 10 mm). For better heat dissipation, install it on an aluminium profile.
Why choose this product?
No light dots, 1200 lm/m, CRI > 90.
Flexible, 3M adhesive, cut every 50 mm.
Via suitable supplies or controllers, 30 m.
Technical specifications
| Product type | Single-colour dimmable COB LED strip |
|---|---|
| Voltage | 24V DC |
| Power | 12W/m |
| Density | 480 LED/m |
| Luminous flux | 1200 lm/m |
| CRI | > 90 |
| Protection | IP67 |
| Cut | Every 50 mm |
| Width | 8 mm (sleeve 10 mm) |
| Length | 30 m roll |
| Adhesive | 3M included |
Advantages
- 480 LED/m: continuous, dot-free effect.
- 1200 lm/m: high brightness.
- IP67: waterproof, outdoor.
- CRI > 90: faithful colours.
- Dimmable 24V: 30 m roll.
- Flexible, 3M adhesive: cut every 50 mm.
Recommended applications
| 🚪 | Cornices and ceilings — continuous linear lighting. |
| 🏠 | Kitchens and furniture — IP67 waterproof. |
| 🏛 | Shops — CRI > 90. |
| 🌿 | Protected outdoor — flexible, 30 m. |
Installation guide
| 1 | Switch off the power Cut the 24V supply before installation. |
| 2 | Cut and stick Cut the strip every 50 mm and apply the 3M adhesive. |
| 3 | Wire it Connect to the 24V driver (and dimmer if needed). |
| 4 | Check Restore power and check the lighting. |
Frequently asked questions
The 480 COB LED/m remove the light dots of SMD.
Yes, via suitable power supplies or controllers.
Yes, its IP67 rating makes it waterproof.
| ⚡ 12W/m 1200 lm/m | ☂ IP67 CRI 90 | 📐 480 LED/m 30 m | 🔌 In stock Fast shipping |
Data sheet
- Power (W)
- 12
- Power source (V)
- 24V-DC
- Color temperature CCT
- 2700K
4000K
- LED
- COB Flip chip
- Dimmable
- Sí
- Brightness (Lm)
- 1200
- Color rendering index (Ra):
- ≥90
- IP
- IP67
- Luminous angle
- 180º
- Measures (mm)
- 10x30000mm
- Operating temperature
- -20ºC ~ +55ºC
- Energy efficiency 2021
- A+
- Energy efficiency 2023
- F
- Lifespan
- 100.000h
- Certification
- CE - RoHS
- Warranty
- 3 años
Specific References
- ean13
- 8435637221900