English
Français 
Italiano 
RGB LED Strip Amplifier 350W DC 12-24V
4-channel signal amplifier for RGB LED strip with DC 12V-24V input and DC 12V-24V output (up to 350W). Ideal for indoor use, IP20.
RGB LED Strip Amplifier 350W DC 12-24V
Extend your RGB LED strip installations without signal loss. This high-speed repeater regenerates colour and power up to 350W, with 12-24V input and output and multiple series or parallel connection options.
⚡ 350W🔌 12-24V🔄 4A/channel🎨 RGB
| 350W Max power | 12-24V Voltage | 4A Per channel | RGB Signal |
The RGB LED strip amplifier (repeater) is a high-speed device designed to extend RGB LED strip installations without degrading the signal or colour. When the strip length exceeds the capacity of the power supply or controller, this amplifier regenerates the signal to keep colours vivid and even across the whole installation.
It offers multiple connection options, in series or in parallel, and handles up to 4 amps per channel for a maximum power of 350W. With 12-24V input and output, it integrates easily into your setups; it is advisable to unify the voltage of the LED strips when they are not the same.
Why choose this product?
Keeps colours vivid and even over long RGB runs.
Series or parallel wiring to suit your setup.
4A per channel to power long RGB LED strips.
Technical specifications
| Product type | RGB LED strip amplifier / repeater |
|---|---|
| Maximum power | 350W |
| Input/output voltage | 12-24V DC |
| Current per channel | Up to 4A |
| Signal type | RGB |
| Connection | Series or parallel |
Advantages
- Up to 350W: powers long RGB installations.
- 4A per channel: enough power for long runs.
- Regenerated signal: vivid, even colours without loss.
- Flexible connection: series or parallel.
- 12-24V compatible: fits most installations.
Recommended applications
| 🚪 | Long RGB LED strips — extension without signal loss. |
| 🏠 | Decorative lighting — facades, cornices and displays. |
| 🏛 | Retail and hospitality — extended RGB installations. |
| 🌿 | Custom projects — series or parallel setups. |
Installation guide
| 1 | Switch off the power Cut the supply before wiring. |
| 2 | Insert the amplifier Place it between the existing strip section and the new RGB section. |
| 3 | Connect the power Connect a 12-24V power supply to the input and the strip to the output, matching the RGB channels. |
| 4 | Unify the voltage Use the same voltage on all strips, then check colour synchronisation. |
Frequently asked questions
To extend an RGB LED strip installation by regenerating the signal to avoid colour and intensity loss.
Up to 350W, with 4A per channel.
Yes, in series or parallel as the installation requires.
| ⚡ 350W 4A/channel | 🔄 RGB signal Regenerated | 🔌 12-24V Flexible wiring | 📦 In stock Fast shipping |
Data sheet
- Power (W)
- 350
- Power source (V)
- 12/24V-DC
- IP
- IP20
- Frequency (Hz)
- 50-60Hz
- Measures (mm)
- L128 x W65 x H24 mm
- Material
- Aluminum
- Operating temperature
- -20ºC ~ +55ºC
- Energy efficiency 2021
- A+
- Lifespan
- 50.000h
- Certification
- CE - RoHS
- Warranty
- 2 años
