English
Français 
Italiano 
Motion Sensor for profilees in aluminium and LED strip 12/24VDC
Switch with motion sensor that allows allumer and turn off the LED strips of 12 and 24 volts housedes in of the profilees in aluminium.
Its compact size of 42x10mm lui allows to be installed indoors of profilees in aluminium for LED strip.
The dome of the sensor must be exposed outdoors of the diffuseur for que the motion detector agisse correctement.
IR Motion Sensor for Aluminium Profiles and LED Strip 12/24VDC
Automate your LED strip with this infrared sensor that fits inside aluminium profiles. Working at 12/24VDC, it detects movement up to 2 metres and switches off the strip 40 seconds after the last movement.
🔌 12/24VDC🔄 2 m detection⏱ 40 s🔌 For profile
| 12/24VDC Voltage | 2 m Detection | 40 s Delay |
The infrared motion sensor is designed to fit inside aluminium profiles to automate the switching of your LED strip. A hole must be made in the profile's opal diffuser to house the sensor and leave the detector dome exposed.
Thanks to its infrared sensor, it detects movement within a 2-metre range and automatically switches on the LED strip. Once the sensor stops detecting movement, the strip switches off after 40 seconds. Compatible with a 12/24VDC supply, it is ideal for wardrobes, stairs, corridors or furniture fitted with LED strip.
Why choose this product?
Automatic switching of the LED strip on passage.
The strip switches off 40 seconds after the last movement.
Houses inside the aluminium profile, dome exposed.
Technical specifications
| Product type | Infrared motion sensor for LED strip |
|---|---|
| Voltage | 12/24VDC |
| Detection range | 2 m |
| Delay | 40 seconds after the last movement |
| Sensor type | Infrared |
| Installation | Built into aluminium profile (drill the diffuser) |
Advantages
- 2 m detection: automatic switching of the LED strip.
- Off after 40 s: energy savings.
- 12/24VDC: compatible with LED strip installations.
- Built-in: houses inside the aluminium profile.
- Convenience: hands-free lighting.
Recommended applications
| 🚪 | Wardrobes and dressing rooms — automatic strip switching. |
| 🏠 | Stairs and corridors — passage detection. |
| 🏛 | Furniture and shelves — hands-free lighting. |
| 🌿 | Kitchens — under-cabinet with LED strip. |
Installation guide
| 1 | Switch off the power Cut the 12/24VDC supply before installation. |
| 2 | Drill the diffuser Make a hole in the profile's opal diffuser for the sensor dome. |
| 3 | House the sensor Place the sensor inside the profile and wire it between the supply and the LED strip. |
| 4 | Test Restore power and check switching on movement and off after 40 s. |
Frequently asked questions
Up to 2 metres.
40 seconds after the last detected movement.
A 12/24VDC supply, as for the LED strip.
| 🔄 2 m IR detection | ⏱ 40 s Delay | 🔌 12/24VDC For profile | 📦 In stock Fast shipping |
Data sheet
- Power source (V)
- 12/24V-DC
- Frequency (Hz)
- 50-60Hz
- Measures (mm)
- 42*10mm
- Material
- Aluminum + PC
- Energy efficiency 2021
- A+
- Lifespan
- 20.000h
- Certification
- CE - RoHS
- Warranty
- 2 años
