English
Français 
Italiano 
Emergency Battery for LED luminaire - Max.50W
IT CONVERTS ALL TYPES OF LED LUMINAIRES - WITH DRIVER - TO EMERGENCY. With the emergency battery of 2400 mAh, vous forrez transformer not importe quel LED luminaire in urgence. Son fonctionnement se fait by the regulation at 30% of the luminaire where vous the installez automatiquement. Maximum of 50W. (Ne suitable pas to the produits without conducteur)
Emergency Battery for LED Luminaire - Max. 50 W - 2400 mAh
A 2400 mAh emergency battery that keeps your LED luminaire on during a power cut, regulating the output to 30 % of its power. Compatible with luminaires up to 50 W, with 50 to 90 minutes of runtime depending on the power.
🔋 2400 mAh⚡ Max. 50 W⏱ 50-90 min🔌 Secours
| 2400 mAh Capacity | 50 W Max power | 50-90 min Runtime | 30 % Backup output |
This 2400 mAh (2.4 Ah) emergency battery provides a runtime that depends on the consumption of the luminaire it is installed in. During a power cut, the luminaire regulates its light output to 30 % of its full power to extend the emergency lighting time. It is compatible with LED luminaires up to 50 W.
The minimum runtimes are as follows: 50 W → 50 minutes, 40 W → 60 minutes, 30 W → 75 minutes and 20 W → 90 minutes. The battery is installed by feeding the luminaire's LED driver and connecting to the mains, making it a reliable solution for safety lighting and service continuity.
Why choose this product?
Keeps the luminaire on during a power cut.
Runtime of 50 to 90 min depending on power.
Compatible with a wide range of luminaires.
Technical specifications
| Product type | Emergency battery for LED luminaire |
|---|---|
| Capacity | 2400 mAh (2.4 Ah) |
| Max luminaire power | 50 W |
| Backup-mode output | 30 % of full power |
| Runtime 50 W | 50 minutes |
| Runtime 40 W | 60 minutes |
| Runtime 30 W | 75 minutes |
| Runtime 20 W | 90 minutes |
| Installation | Feeds the LED driver, connected to mains |
Advantages
- Emergency lighting: service continuity during a cut.
- Up to 90 minutes: runtime depending on power.
- Output regulated to 30 %: extends lighting time.
- Compatible up to 50 W: wide compatibility.
- Integrated installation: feeds the luminaire's LED driver.
Recommended applications
| 🚪 | Safety lighting — continuity during a power cut. |
| 🏠 | Shops and offices — keeps essential lighting on. |
| 🏛 | Corridors and exits — visibility during a failure. |
| 🌿 | Industry — emergency lighting for luminaires. |
Installation guide
| 1 | Switch off the power Cut the luminaire's supply before installation. |
| 2 | Connect to the driver Connect the battery so that it feeds the LED driver. |
| 3 | Connect to the mains Connect the assembly to the mains. |
| 4 | Test the backup Cut the mains to check it lights at 30 % output. |
Frequently asked questions
From 50 minutes (50 W) to 90 minutes (20 W) depending on luminaire power.
The luminaire regulates its output to 30 % of full power.
With LED luminaires up to 50 W.
| 🔋 2400 mAh Max. 50 W | ⏱ 50-90 min 30 % output | 🔌 Backup Safety | 📦 In stock Fast shipping |
Data sheet
- Power source (V)
- 85-265V
- IP
- IP20
- Frequency (Hz)
- 50-60Hz
- Measures (mm)
- 140x55x33mm
- Material
- Thermoplastic
- Operating temperature
- -20ºC ~ +40ºC
- Energy efficiency 2021
- A+
- Certification
- CE - RoHS
- Warranty
- 2 años
 Mario on 2021-10-26 07:44:33 | Question: Hola , el Kit de conversion a Emergencia de luminaria LED - Max.50W REF: BATERYPCTMBW trae la batería integrada? O me haría falta una batería . Gracias, un saludo. |
Answer: La batería está integrada, es de 3,7V y 2400mAh. No necesita comprar ninguna batería adicional. | |
