English
Français 
Italiano 
Cross Junction Connector of type X for single-phase rail
Cross-Shaped Connector for single-phase rail, in flame-retardant thermoplastic with copper connection, available in white or in black, with dimensions of of 105x105x20mm.
The junction connector in X for rail allows the union of of up to 4 sections of single-phase rail, forming a 90° angle between elles.
Assembly is carried out by snapping at the end of the single-phase rail, puis in ajustant the section suivante.
Disponible in black and white
Cross (X) Joint Connector for Single-Phase Track
A flame-retardant thermoplastic connector to the continuous cross-shaped assembly of up to 4 track sections, at 90º to each other. With a copper connection and available in black or white to match the track, it integrates discreetly with a joint of under 5 mm.
✚ Cross joint🔌 Single-phase🔥 Flame-retardant⚡ 2200W / 10A
| Cross joint Type | Single-phase Compatibility | 2200W / 10A Max load |
The joint connector lets you join up to 4 sections of single-phase tracks for LED spotlights, to the continuous cross-shaped assembly of up to 4 track sections, at 90º to each other. Made from flame-retardant thermoplastic and available in black or white to match the chosen track, it includes a single-line copper connection for a reliable electrical contact.
The connector clicks into the end of a track bar, then the next track is fitted, with the whole assembly fully concealed by a joint of under 5 mm for a neat, discreet result. Its dimensions are 105 x 105 x 20 mm. Note: depending on the electrical load, in domestic installations you can install spotlights up to a maximum of 2200W / 10A on the same line.
Why choose this product?
To create neat, custom lighting paths with your single-phase tracks.
Safety and durability, in black or white to match the track.
Reliable electrical contact up to 2200W / 10A per line.
Technical specifications
| Product type | Joint connector for single-phase track |
|---|---|
| Joint type | Cross joint |
| Compatibility | Single-phase tracks only |
| Material | Flame-retardant thermoplastic |
| Colour | Black or white (to match the track) |
| Connection | Copper, single line |
| Maximum load | 2200W / 10A |
| Dimensions | 105 x 105 x 20 mm |
Advantages
- Cross joint: neat, custom lighting paths.
- Flame-retardant thermoplastic: safety and durability.
- Discreet joint: concealed to under 5 mm.
- Copper connection: reliable contact.
- Up to 2200W / 10A: per line in domestic installations.
Recommended applications
| 🚪 | Shops and stores — track lighting paths. |
| 🏠 | Museums and galleries — custom configurations. |
| 🏛 | Windows and showrooms — flexible corners and shapes. |
| 🌿 | Offices — modular installations. |
Installation guide
| 1 | Switch off the power Cut the supply before installation. |
| 2 | Click in the connector Click the connector into the end of a track bar. |
| 3 | Fit the tracks Fit the track sections; the joint stays concealed (under 5 mm). |
| 4 | Check the load Make sure not to exceed 2200W / 10A per line, then restore power. |
Frequently asked questions
Single-phase tracks for LED spotlights only.
Up to 2200W / 10A in domestic installations.
Black or white, to match the chosen track.
| ✚ Cross joint Single-phase | 🔥 Flame-retardant Safe | ⚡ 2200W / 10A Copper | 📦 In stock Fast shipping |
Data sheet
- Colour
- Black
White
- IP
- IP20
- Measures (mm)
- 105*105mm
- Material
- Thermoplastic
- Certification
- CE - RoHS
- Warranty
- 2 años
Specific References
- ean13
- 8435637201476
