English
Français 
Italiano 
VERONA 40W CCT Solar LED Street Light
The VERONA solar LED street light is a fully autonomous road luminaire fitted with two movable LED heads you can aim freely to send the light exactly where it is needed. Built in black PC+ABS and rated IP65, it delivers 40 W of power and up to 4,800 lumens, with a 140º x 70º asymmetric optic that covers a far wider area than a conventional symmetric beam.
Its built-in 19 W monocrystalline solar panel recharges a 6,000 mAh (9.6 V) LiFePO4 battery in just 5 hours — a removable battery with overcharge and deep-discharge protection. The result: up to 60 hours of autonomy in economy mode. Colour temperature is selectable between 3000 K (warm white) and 4000 K (natural white), either from the supplied remote control or from the buttons on the base of the luminaire.
VERONA 40 W CCT Solar LED Street Light
Two 360º adjustable LED heads, up to 60 hours of autonomy and 4,800 lumens: the solar solution for lighting roads, car parks and public areas without running a single cable.
☀ 19 W monocrystalline panel 📡 PIR + twilight sensor 🔋 LiFePO4 6,000 mAh battery 🎮 Remote control included ☂ IP65 outdoor
| 40 W Power |
4,800 lm Luminous flux |
3000/4000K Selectable CCT |
IP65 Protection |
The VERONA solar LED street light is a fully autonomous road luminaire fitted with two movable LED heads you can aim freely to send the light exactly where it is needed. Built in black PC+ABS and rated IP65, it delivers 40 W of power and up to 4,800 lumens, with a 140º x 70º asymmetric optic that covers a far wider area than a conventional symmetric beam.
Its built-in 19 W monocrystalline solar panel recharges a 6,000 mAh (9.6 V) LiFePO4 battery in just 5 hours — a removable battery with overcharge and deep-discharge protection. The result: up to 60 hours of autonomy in economy mode. Colour temperature is selectable between 3000 K (warm white) and 4000 K (natural white), either from the supplied remote control or from the buttons on the base of the luminaire.
Why choose the VERONA solar street light?
Each LED head rotates through a full 360º: light a pathway in both directions, a junction or a square from a single pole, with no wasted dark zones.
A 6,000 mAh LiFePO4 battery (1,000 cycles) and a 19 W monocrystalline panel deliver several nights of operation from a single 5-hour full charge.
The twilight sensor switches the luminaire on at dusk, while the PIR motion sensor (90º / 6 m) boosts output to 100 % as soon as movement is detected.
Working modes
The VERONA street light offers two working methods, selectable from the remote control, to balance light level against runtime:
| Mode 1 Constant output at 3 %, rising to 100 % for 20 seconds on every motion detection. Up to 60 h of autonomy |
Mode 2 Constant output at 60 % for 3 hours, then automatic switch to Mode 1. Up to 45 h of autonomy |
The runtimes shown are maximum values: they vary with the weather, the season, panel orientation and the location of the installation.
Two colour temperatures to choose from
| 3000 K — Warm white Welcoming light for residential pathways, terraces and communal areas. |
4000 K — Natural white Crisp, reassuring rendering for roads, car parks, campuses and busy walkways. |
CCT is changed using the included remote control or the buttons on the base of the luminaire — no dismantling required.
Technical specifications
| Power | 40 W |
|---|---|
| Nominal luminous flux | 4,800 lm |
| Colour temperature (CCT) | 3,000 K / 4,000 K selectable (remote control or buttons on base) |
| Beam angle | 140º x 70º (asymmetric optic) |
| Head adjustment | 360º rotation per head |
| LED chip | SMD2835, 96 units |
| LED lifespan | 25,000 h |
| Energy class | A |
| Ingress protection | IP65 |
| Impact protection (IK) | Not certified |
| Housing | PC+ABS |
| Finish | Black, transparent diffuser |
| Mounting type | Ø60 mm pole / bracket |
| Recommended mounting height | 3 - 4 m |
| Dimensions | 612 x 201 x 128 mm |
| Operating temperature | -20 ºC to +40 ºC |
| Electrical insulation class | Class III |
| Remote control | Included |
| Battery type | LiFePO4 |
| Nominal capacity | 6,000 mAh |
| Nominal voltage | 9.6 V |
| Battery location | Integrated in the luminaire |
| Removable battery | Yes |
| Charge/discharge protection | Yes |
| Charging time | 5 hours |
| Battery service life | 1,000 cycles |
| Solar panel type | Monocrystalline |
| Maximum panel power | 19 W |
| Voltage at maximum power | 16 V |
| Panel location | Integrated in the luminaire |
| Twilight sensor | Yes |
| PIR motion sensor | Yes |
| Detection angle | 90º |
| Detection range | 6 m |
| Certifications | CE - RoHS |
| Warranty | 3 years |
Recommended applications
Designed for outdoor installations with no access to the electricity grid, the VERONA solar street light is particularly suited to:
| 🌳 | Parks and pedestrian paths — safety lighting for walkways where no mains supply is available. |
| 🏪 | Shopping centres, corporate campuses and squares — car parks and transit areas lit with zero grid consumption. |
| 🏠 | Residential developments, communal areas and terraces — autonomous lighting installed with no civil works. |
Key benefits of the VERONA street light
- ✓ Wiring-free installation: 100 % solar operation, no mains connection and no trenching.
- ✓ Twin adjustable heads: 360º rotation per head and a 140º x 70º asymmetric optic for wider coverage.
- ✓ Two working modes: up to 60 h of autonomy in economy mode, 45 h in boosted mode.
- ✓ Selectable 3000/4000 K CCT: one luminaire suits both residential settings and road applications.
- ✓ Removable LiFePO4 battery: 1,000 cycles, charge/discharge protection and easy end-of-life replacement.
- ✓ Zero running cost: nothing on your electricity bill, IP65 rated and covered by a 3-year warranty.
Installation guide
Installing the VERONA solar street light requires no electrical connection:
| 1 | Choose the location Pick an open, sunny spot where no trees or buildings cast shade on the solar panel. |
| 2 | Fit onto the Ø60 mm pole Mount the luminaire on a Ø60 mm bracket or pole top at a height of 3 to 4 m, then tighten the locking screws. |
| 3 | Aim the two LED heads Rotate each head through 360º to direct the beam towards the areas you want to light. |
| 4 | Set CCT and working mode Select 3000 K or 4000 K and the working mode using the included remote control or the buttons on the base. The luminaire then switches on automatically at dusk. |
Frequently asked questions
Up to 60 hours in Mode 1 (constant 3 % with 100 % peaks on detection) and up to 45 hours in Mode 2 (60 % for 3 hours, then Mode 1). These are maximum values and vary with weather, season, orientation and the location of the installation.
Yes, the remote control is included. It lets you change the colour temperature and the working mode. The same settings are also available from the buttons on the base of the luminaire.
Any Ø60 mm bracket or pole top. The recommended mounting height is 3 to 4 m, which matches the range of the motion sensor (6 m, 90º).
Yes. The 6,000 mAh / 9.6 V LiFePO4 battery is integrated in the luminaire but removable, with overcharge and deep-discharge protection and a service life of 1,000 cycles.
Yes: it is IP65 rated and operates from -20 ºC to +40 ºC, making it suitable for uncovered outdoor installation all year round.
| 🔋 Up to 60 h Removable LiFePO4 battery |
☀ 100 % solar 19 W integrated panel |
☂ IP65 -20 ºC to +40 ºC |
🛡 3-year warranty CE · RoHS |
Data sheet
- Power (W)
- 40
- Color temperature CCT
- Selectable 3000K-4000K
- LED
- SMD2835
- Brightness (Lm)
- 4800
- Color rendering index (Ra):
- ≥80
- Colour
- Black
- IP
- IP65
- Luminous angle
- 140ºx70º
- Measures (mm)
- 612x201x128mm
- Material
- ABS
- Operating temperature
- -20ºC ~ +40ºC
- Energy efficiency 2023
- A
- Lifespan
- 25.000h
- Certification
- CE - RoHS
- Warranty
- 3 años
