English
Français 
Italiano 
T-Junction Connector for Single-Phase Rail
T-shaped connector for single-phase rail joint, made of flame-retardant thermoplastic with a copper connection, available in white or black, with dimensions of 150×70×20mm.
The T connector allows the union of up to 3 sections of single-phase rail at 90° angles to each other.
Assembly is carried out by snapping onto the end of the rail, then adjusting the next section.
T Joint Connector for Single-Phase Track
A flame-retardant thermoplastic connector for the T-joining of three track sections, at a 90º right angle of your single-phase tracks for LED spotlights. With a copper connection, available in black or white to match the track, it integrates discreetly (joint under 5 mm). It joins 3 track sections at 90º.
⤳ T joint🔌 Single-phase🔥 Flame-retardant⚡ 2200W / 10A
| T joint Type | Single-phase Compatibility | 2200W / 10A Max load |
The joint connector provides the T-joining of three track sections, at a 90º right angle of single-phase tracks for LED spotlights. Made from flame-retardant thermoplastic and available in black or white to match the chosen track, it includes a single-line copper connection for a reliable electrical contact. It joins 3 track sections at 90º.
The connector clicks into the end of a track bar, then the next track is fitted, with the whole assembly fully concealed by a joint of under 5 mm for a neat, discreet result. Its dimensions are 150 x 70 x 20 mm. Note: depending on the electrical load, in domestic installations you can install spotlights up to a maximum of 2200W / 10A on the same line.
Why choose this product?
To assemble your single-phase tracks neatly and discreetly.
Safety and durability, in black or white to match the track.
Reliable electrical contact up to 2200W / 10A per line.
Technical specifications
| Product type | Joint connector for single-phase track |
|---|---|
| Joint type | T joint |
| Compatibility | Single-phase tracks only |
| Material | Flame-retardant thermoplastic |
| Colour | Black or white (to match the track) |
| Connection | Copper, single line |
| Maximum load | 2200W / 10A |
| Dimensions | 150 x 70 x 20 mm |
Advantages
- T joint: neat assembly of single-phase tracks.
- Flame-retardant thermoplastic: safety and durability.
- Discreet joint: concealed to under 5 mm.
- Copper connection: reliable contact.
- Up to 2200W / 10A: per line in domestic installations.
Recommended applications
| 🚪 | Shops and stores — extending track lines. |
| 🏠 | Museums and galleries — custom lighting paths. |
| 🏛 | Windows and showrooms — flexible configurations. |
| 🌿 | Offices — modular installations. |
Installation guide
| 1 | Switch off the power Cut the supply before installation. |
| 2 | Click in the connector Click the connector into the end of a track bar. |
| 3 | Fit the next track Fit the next track section; the joint stays concealed (under 5 mm). |
| 4 | Check the load Make sure not to exceed 2200W / 10A per line, then restore power. |
Frequently asked questions
Single-phase tracks for LED spotlights only.
Up to 2200W / 10A in domestic installations.
Black or white, to match the chosen track.
| ⤳ T joint Single-phase | 🔥 Flame-retardant Safe | ⚡ 2200W / 10A Copper | 📦 In stock Fast shipping |
Data sheet
- Colour
- Black
White
- IP
- IP20
- Measures (mm)
- 150*70mm
- Material
- Thermoplastic
- Certification
- CE - RoHS
- Warranty
- 2 años
Specific References
- ean13
- 8435637201445
